|
|
|
Poseidon 3468 |
|
|
|
|
• Preisliste zusenden
• Anfrage
|
| |
Poseidon 3468 is an IP thermostat with 2 relay outputs, 4 dry contact inputs, and support for 4 sensors. Includes a built-in web server, output control and alarm alerts (e-mail and SNMP trap). Two relay outputs rated up to 110/230V can be controlled manually over a web interface.
Poseidon 3468 alerts the operator to critical situations (contact opened/closed, or temperature/humidity out of safe range).
In case of an alarm, Poseidon sends an e-mail and connects to your NMS (Network Management System) with a SNMP trap.Configuration and current sensor readings are accessible through a graphical WWW interface.
* IP thermostat function to control outputs locally
* 2 outputs rated at 250V (double-throw relay contacts)
* Connect up to 4 temperature or humidity sensors and 4 Dry Contact inputs
*When a contact is closed, e-mails or SNMP traps are sent to multiple recipients
Applications
Remote rack monitoring
Door open, temperature / humidity, power outage, states of contacts, equipment restart
UPS / back-up generator monitoring
Fuel level, diesel generator status, remote start over IP, monitoring of temperature and service contacts
Air conditioning control over IP
Turns on heating / cooling when specified temperatures are sensed
IP-based security systems
o Surveillance systems (external sensors)
o Equipment status, access control systems
Operation logging:
storages, coolers and freezers (food and pharmaceutical industry)
Monitoring systems:
Information booths, ATMs, terminals |
| |
|
| |
What does Poseidon 3468 measure
Intelligent sensors are connected to the 1Wire (RJ11) bus.
* Total bus length up to 10/30 m.
* Each sensor watches its own readings (SafeRange). When the range is exceeded (alarm condition), e-mail or SNMP trap is invoked.
* Temperature - Temp-1Wire
* Humidity - Humid-1Wire
Sensors with contacts:
* 2 relay outputs
o PowerEgg
* 4 Dry Contact inputs
o Flood detector
o Gas leak detector
o Smoke detector
o Motion detector |
| |
|
| |
IP thermostat = output control
Each relay output can be controlled either by a local condition, or manually:
* Over WWW by the user
* M2M XML protocol
* M2M SNMP protocol
* M2M Modbus/TCP protocol |
| |
|
| |
| The local condition mode works as a thermostat or hygrostat over IP. The output can be tied to any connected sensor, including dry contact inputs. The control is affected by sensor hysteresis. |
| |
Basic features
* No special SW needed
* Installation in 10 minutes
* Built-in graphical WWW interface for configuring the unit and displaying the reading (screenshot)
* Outputs controlled over IP or locally (thermostat mode). Outputs can be controlled based on a selected sensor (input) value being less than/greater than specified.
* Alarm alerts:
o Email
o SNMP Trap
o SMS via the PD Trigger application
* Pop-up window with the alert, using the supplied SW application
* With the supplied HWg SDK, you can control Poseidon from your own applications in 2 hours after opening the box
* Applications in IT:
o Poseidon is supported by more than 60 NMS systems (LoriotPro, Nagios, SNMPc, HP OpenView, IBM Tivoli, MRTG, Intellipool, and more)
o SDK (Software Development Kit): libraries, examples (ActiveX, VB, Delphi, C, C#, .NET)
* Industrial applications:
o Works with most SCADA systems (OPC server and I/O server via Modbus/TCP)
o “Soft-PLC” Windows application for remote access to the units, measuring and control
o Windows application for data collection in the food industry, IT systems for pharmacies |
| |
|
| |
|
|
