|
|
|
EXT-HDMI1.3-1CAT6 HDMI 1.3 Extender über ein CAT6 bis zu 60 Meter Gefen |
HDMI HDTV Extension / Verlängerung / Verstärkung / Extender über CAT5, Patchkabel, Kupferkabel |
| |
|
|
|
• Preisliste zusenden
• Anfrage
|
| |
The Gefen Extender for HDMI 1.3 over one CAT6 supports the HDMI 1.3 specification with features such as Deep Color, Full 1080p HD and compressed lossless audio formats such as Dolby TrueHD and DTS-HD Master Audio.
The CAT6 extender's pure digital transmission method insures 100% signal integrity over this single cable extension solution.
How It Works
The Gefen Extender for HDMI 1.3 over one CAT6 system consists of send and receive units. The HDMI source (set-top box, DVD player, or gaming console) connects to the sender unit with the supplied 6-foot HDMI cable. The receiver unit connects to an HDTV display. One CAT-6a cable links the sender and receiver together at up to 200 feet apart. Power is applied to both the sender and receiver with the included 5V DC power supplies. A perfect image is now displayed on the remote HDTV display.
Note: This device is an HDCP pass-through device.
HDMI 1.3 Features Supported:
Dolby TrueHD & DTS-HD Master Audio
Deep Color Supported (x.v.Color)
225 MHz (up to 12 bit YUV 444 @ 1080p)
CEC Protocol Pass-Through
Lip-Sync Pass-Through
Features:
Flexible extension of high-bandwidth HDMI 1.3 thanks to CAT6a cable
Audio and video are transmitted digitally over one CAT6a cable for zero signal loss
Single Link Range: 1080p@60 Hz, 12 bit color depth, 1920x1200
Compliant with HDMI 1.3, HDMI 1.2, HDCP 1.1 and DVI 1.1 standards
Supports digital video formats in Deep Color Mode at up to 12bits/color
Supports lossless compressed digital audio (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio)
Equalizes HDMI signal and retransmits it with optimal quality regardless of incoming signal quality
Eliminates equipment noise in the viewing environment
Improved compensation for cable skew
Specifications:
Video Amp. Bandwidth: 225 MHz
Single Link Range: 1080p@60, 12 bit color depth, 1920x1200 max. res
Input DDC Signal: 5 Volts p-p (TTL); Input Video Signal: 1.2 Volts p-p
HDMI Connector: Type A, 19 Pin Female
Link Connector: RJ-45 Shielded
Power Supply: (2) 5V DC Power Supplies, 10W power consumption each
Shipping Weight: 3 lbs.
Dimensions: 2" W x 1" H x 2.1" D
Package Includes:
(1) Extender for HDMI1.3 over one CAT6 Sender
(1) Extender for HDMI1.3 over one CAT6 Receiver
(2) 5V DC Power Supplies
(1) User's Manual
(1) Set of Wall Mounting Plates |
| |
|
| Ansprechperson |
DANKE dass SIE uns besuchen.
Jürgen Binder
Beratung & Verkauf
HIER finden Sie meinen
Kompetenzbereich
juergen.binder[a]bellequip.at
Tel: +43 (0) 2822 33 33 993
Mobil: +43 (0) 664 33 33 993
BellEquip Zentrale:
Tel: +43 (0) 2822 33 33 990
Fax: +43 (0) 2822 33 33 995
info[a]bellequip.at
KVM Switches
Matrix Switches
KVM Extender
DVI Extender
USB 2.0 Extender
KVM over IP
DVI over IP
KVM, DVI, VGA, HDMI
DisplayPort, 3G-SDI, HD-SDI, SD-SDI
Video, Audio, USB, RS232
Digital Signage
Scaler
Konverter
|
| Kompetenzbereiche |
Martin Hinterlehner
Data Center Solutions
IT Infrastrukturmanagement
KVM Switches
KVM Extender
KVM over IP
KVM, DVI, Video, Audio
Digital Signage und Extender
Christoph Weixelbaum
USV Anlagen - UPS Systems
USV Batterien / Akkus
Serverschränke, Netzwerkschränke
CATx und LWL Kabel
Passive Netzwerktechnik
DI(FH) Günther Lugauer
Serielle
Datenkommunikation
Rack Monitoring
Power Management
Wireless Communication
Jürgen Binder
KVM Switches
KVM Extender
KVM over IP
DVI KVM Extender
DVI Matrix Switches
KVM, DVI, Video, Audio
Digital Signage und Extender
Home
|
|
