|
|
|
Dry Contact (Rack) Monitoring |
Überwachung von bis zu 10 potentailfreien Kontakten |
| |
|
|
|
• Preisliste zusenden
• Anfrage |
| |
sensorProbe2DC
A low cost alternative for dry contact monitoring, the sensorProbe2DC, an enhanced version of sensorProbe2, is designed for small and medium monitoring requirements, such as a small computer room temperature and UPS status, security etc. The sensorProbe2DC comes in a 0 U rackmount box with 2 full autosense RJ-45 ports for connecting any of AKCP’s intelligent sensors. The 10 dry contact option gives the sensorProbe2DC
the ability to have up to 5 dry contact inputs per RJ-45 port, giving a total maximum possible inputs of 10, by utilizing both of the RJ-45 sensor ports. The 10 dry contact option includes a special dry-contact cable which has 5 dry-contact input connectors, which can be plugged into any of the 2 autosense RJ-45 ports.
These dry-contact ports can be used to monitor any dry-contact inputs, just like the normal autosense dry-contact ports, but, these ports can only be set to operate in the input mode.These additional sensors are labeled as ports 3 to 12
Features
Comes with a embedded web server allowing all parameters to be easily configured
Supports all major communications protocols
Supports up to 2 of our intelligent autosense sensors simultaneously
Full SNMP compliant
Includes SNMP MIB
Includes SNMP utilities for setting and getting parameters. Example programs to read and control the sensorProbe
Supports SNMP polling which allows the sensor values to be collected and graphed with host applications
Sends traps notifications to two destinations
Sends email notifications to two email addresses
Email and traps include the sensor description, current sensor value
Can Sets thresholds for all sensors
Specifications
Dimension
Small Size only 4.5" x 2.5" x 1.25"
Weight
0.242 pounds
Mounting
0u rackmount, or wall hanging
Status Indication
LED indication for Power
LED for Network Connectivity
LED for sensor online and threshold status
Network Interface
Standard 10 Base-T Ethernet RJ-45
Power Supply
Voltage 7.0 - 9 V
Current >= 1 Amp
Inputs
2 RJ-45 ports for connecting AKCP sensors
Configurable analog inputs on any of the 2 RJ-45 sensor ports (0-5VDC)
Upto 10 dry contact inputs
Output
Configurable output signals(0VDC/5VDC) on any of the 2 RJ-45 sensor ports
Operating Environment
Temperature : Min. -35° C - Max. +55° C
Humidity : Min. 20% - Max. 80% (Non-Condensing)
For full details and test results follow this link to: Environment test
Components
Manufactured using highly integrated, low power
surface mount technology to ensure long term reliability. |
| |
|
|
|
